dbx RTA-M Messmikrofon
Ein Kondensator Spezialmikrofon für Driverack und andere Einmessanwendungen, Charakterisitik: Kugel, Elektret-Kapsel, Frequenzbereich: 20 – 20 000 Hz, Impedanz: 250 Ohm, Empfindlichkeit: - 63 dB + - 3 dB ( 0 dB = 1 V / microbar 1 000 Hz ), die Stromversorgung erfolgt über 9 – 52 V Phantomspeisung, die Packung beinhaltet noch eine Mikrofonhalterung und Koffer.
dbx RTA-M Reference Microphone — Calibrated Room Analysis for DriveRack Systems
\nThe dbx RTA-M is the manufacturer's dedicated measurement microphone for the DriveRack PA, PX, PA+, PA2, and 260 processors. As a flat-response omnidirectional reference tool, it captures the full acoustic signature of a venue so the Auto EQ Wizard can apply accurate corrections during system setup. This instrument is the right choice for live sound engineers who need a repeatable measurement chain for room tuning and pink-noise analysis.
\nBuilt for the DriveRack Ecosystem and the Road
\nUnlike generic measurement mics, this model shares its capsule with the M2 mic that ships with the DriveRack PX. The metal housing is more rugged than the M2's plastic body, and the included hardcover case protects the capsule between gigs. Phantom power is drawn straight from the DriveRack unit, so no external supply or battery is needed in the signal chain.
\nTechnical Specifications — Designed for Accurate Real-Time Analysis
\nEvery spec on this measurement microphone is tuned to deliver a clean, uncolored capture of room acoustics for the DriveRack's analysis routines.
\n- Element: Back Electret Condenser — stable response across the audible band
- The omnidirectional polar pattern picks up reflections and direct sound equally for a true room picture, without proximity bias from a single source direction.
- Frequency Response: 20 Hz - 20 kHz — covers the full range used by the DriveRack's pink-noise analysis
- Sensitivity: -63 dB ± 3 dB (0 dB = 1 V/microbar at 1 kHz, open circuit) — predictable output for system calibration
- Operating Voltage: 9-52 V DC phantom power — draws power directly from the DriveRack, no external supply needed \n
Who Should Use the RTA-M
\nThis model is the right choice for live sound engineers, venue technicians, and AV integrators who already own or plan to deploy a DriveRack PA, PX, PA+, PA2, or 260 processor. Equally useful for house-of-worship teams, touring cover bands, and club installers, it helps tame difficult rooms before the first note plays.
Hergestellt in
China
Alle Bewertungen stammen von verifizierten Kunden, die in der Vergangenheit ein Produkt bei uns gekauft haben.
KI-Zusammenfassung der Bewertungen
Basierend auf der Anzahl der Bewertungen: 18
Stärken
- Hochwertige Verarbeitung: Kunden loben immer wieder die robuste Bauweise und die hochwertige Verarbeitung des Mikrofons, einschließlich seines strapazierfähigen Kunststoffgehäuses für den sicheren Transport.
- Präzise Leistung: Das Mikrofon erfüllt die versprochenen Parameter und eignet sich hervorragend für raumakustische Messungen, wobei es ausgezeichnete Ergebnisse liefert.
- Nahtlose Kompatibilität: Es funktioniert perfekt mit dem Driverack PA2 und ist damit ein unverzichtbares Zubehör für dieses System.
Schwächen
- Hoher Preis: Ein Kunde merkte an, dass das Mikrofon relativ teuer sei.
- Fehlendes Kalibrierungsprotokoll: Ein Nutzer berichtete, dass er das Kalibrierungsprotokoll, das der Hersteller normalerweise jedem Produkt beilegt, nicht erhalten habe.
Was Kunden immer wieder sagen
Fazit
Dokumente
Gebrauchsanweisungen
Herstellerinformationen
Sicherheitshinweise
Die entsprechenden Sicherheitshinweise für dieses Produkt findest du im Benutzerhandbuch.
