Lieferland auswählen

RockBoard RBO CAB F TMXA 30 BK 30 cm MIDI-Kabel

Produktcode: 1338158

RockBoard RBO CAB F TMXA 30 BK 30 cm MIDI-Kabel

Produktcode: 1338158

The RockBoard Flat Mini-TRS to FlaX Midi Type A is a 30 cm MIDI cable designed to keep compact pedalboards tidy and signal paths clean. It converts a 3.5 mm TRS stereo mini-jack output into a standard 5-pin DIN MIDI input using the Type A wiring convention, so it works with gear from Boss, Empress, Korg, Akai, MOD and Make Noise without adapters.
  • Länge: 30 cm
  • Typ-A Stecker: MIDI Male
  • Typ-B Stecker: Jack STEREO 3,5 mm Male
  • Anschlusswinkel: Gerade Klinke - Winkelklinke

RockBoard RBO CAB F TMXA 30 BK 30 cm MIDI-Kabel

The RockBoard Flat Mini-TRS to FlaX Midi Type A is a 30 cm MIDI cable designed to keep compact pedalboards tidy and signal paths clean. It converts a 3.5 mm TRS stereo mini-jack output into a standard 5-pin DIN MIDI input using the Type A wiring convention, so it works with gear from Boss, Empress, Korg, Akai, MOD and Make Noise without adapters. The flat rectangular cable profile hugs the board surface, and the omni-directional FlaX MIDI plug can be rotated to almost any angle and locked in place with a 1.5 mm hex key.

  • Length: 30 cm — short reach for tightly packed pedalboards
  • Connector A: 5-pin DIN MIDI Male — standard MIDI input on effects and controllers
  • Connector B: 3.5 mm TRS stereo mini-jack Male — matches TRS MIDI outputs on modern pedals
  • Wiring: TRS-MIDI Type A (MIDI standard) — Sink on tip, Source on ring, Shield on sleeve
  • Flat rectangular cable profile hugs the pedalboard surface and prevents cable jams under the board
Eine weitere Beschreibung in deiner Sprache ist leider noch nicht verfügbar. Die Beschreibung auf Englisch könnte dir vielleicht helfen.

MIDI Cable for Compact Pedalboards with TRS Outputs

The RockBoard Flat Mini-TRS to FlaX Midi Type A solves a common pedalboard wiring problem: connecting a pedal with a 3.5 mm TRS MIDI output to a device with a standard 5-pin DIN MIDI input. At 30 cm, it is the shortest option in the Flat TRS to FlaX-MIDI Cable series, sized for boards where the two devices sit side by side.

What Sets This MIDI Cable Apart

On the MIDI end, the FlaX Plug is omni-directional, so the 5-pin DIN connector can be rotated to almost any angle and locked in place using a 1.5 mm hex key (not included). The flat rectangular cable profile hugs the board, preventing cable jams and reducing mechanical stress on the internal conductors.

Connector Configuration and Compatibility

Two connector ends bridge the gap between a 3.5 mm TRS stereo mini-jack output and a 5-pin DIN MIDI input.

  • Connector A: 5-pin DIN MIDI Male — standard MIDI input
  • Connector B: 3.5 mm TRS stereo mini-jack Male — matches TRS MIDI outputs
  • Connector Angle: Straight-Angled — MIDI plug adjustable, TRS plug flat angled
  • Compatible With: Boss, Empress, Korg, Akai, MOD, Make Noise and similar TRS-MIDI devices

Cable Construction and Signal Integrity

Flat rectangular conductor geometry is the key to long-term reliability on a pedalboard that gets packed in and out of a case every gig, reducing the twisting that fatigues internal conductors in round MIDI cables.

  • Cable Profile: Flat rectangular — hugs the board surface
  • Length: 30 cm — short reach for tightly packed boards
  • Wiring Standard: TRS-MIDI Type A — Sink on tip, Source on ring, Shield on sleeve

Where This Cable Fits on Your Board

Use this lead whenever a pedal with a 3.5 mm TRS MIDI output needs to reach a device with a traditional 5-pin DIN MIDI input — for example, sending clock or program changes between a multi-effects unit and an older MIDI pedal.

  • Type: MIDI Cable — adapter lead between TRS and DIN MIDI
  • Package Content: MIDI Cable — single cable, no adapters required

Eignung

Kompatibel mit

Universal

Eigenschaften

Farbe

Schwarz

Ein- und Ausgänge

Mikrofoneingang

Nein

Stecker

Typ-A Stecker

MIDI Male

Typ-B Stecker

Jack STEREO 3,5 mm Male

Verpackung

Packungsinhalt

MIDI Cable

Maße und Gewicht

Länge

30 cm

Land

Hergestellt in

China

Dokumente

Herstellerinformationen
Hersteller:
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46, 08258, Markneukirchen, Deutschland
Verantwortliche Person:
Warwick GmbH & Co Music Equipment KG
Sicherheitshinweise

Die entsprechenden Sicherheitshinweise für dieses Produkt findest du im Benutzerhandbuch.